Use, Storage, and Disposal of Electronic Equipment in Switzerland.

Electronic devices contain important resources, including precious and critical raw materials. For an efficient management of these resources, it is important to know where the devices are located, how long they are used and when and how they are disposed of. In this article, we explore the past and current quantities of electronic devices in the in-use stock and storage stock in Switzerland and quantify the flows between the use, storage and disposal phase with dynamic material flow analysis (MFA). Devices included are mobile phones, desktop and laptop computers, monitors, cathode ray tube and flat panel display televisions, DVD players, and headphones. The system for the dynamic MFA was developed as a cascade model dividing the use phase in first, second and further use, with each of these steps consisting of an in-use stock and a storage stock for devices. Using a customized software tool, we apply Monte Carlo simulation to systematically consider data uncertainty. The results highlight the importance of the storage stock, which accounts for 25% (in terms of mass) or 40% (in terms of pieces) of the total stock of electronic devices in 2014. Reuse and storage significantly influence the total lifetime of devices and lead to wide and positively skewed lifetime distributions.

Polybrominated diphenyl ethers listed as Stockholm Convention POPs, other brominated flame retardants and heavy metals in e-waste polymers in Nigeria.

Polybrominated diphenyl ethers (PBDEs) were the first brominated persistent organic pollutants (POPs) listed in the Stockholm Convention. Parties to the convention are currently establishing inventories for developing action plans for the environmentally sound management of PBDE-containing materials. The major use of commercial octabromodiphenyl ether (c-OctaBDE) has been in casings from cathode ray tube (CRT) TVs and computer monitors. Large quantities of used e-waste and electronic equipment have been exported to developing countries with Nigeria being a major importer in Africa. The casings from 382 TVs and computers imported from major world regions to Nigeria were sampled in backyards and waste dumps. The samples were screened with X-ray flourescence (XRF) for bromine and analysed by gas chromatography/ electron capture detection (GC/ECD) for brominated flame retardants (BFRs). A high proportion of the CRT casings (61 %) contained more than 10,000 ppm bromine from BFRs. Decabromodiphenyl ether (DecaBDE) was the major flame retardant used in TV sets and tetrabromobisphenol A (TBBPA) for computer CRTs.The screening suggests that average PBDE levels (of c-OctaBDE + DecaBDE) in Nigerian-stockpiled CRT casings were 1.1 % for TV and 0.13 % for PC CRTs. These are above the Restriction of Hazardous Substances (RoHS) limit and should be separated for RoHS compliant recycling. The Nigerian e-waste inventory of 237,000 t of CRT plastic would therefore contain approx. 594 t c-OctaBDE and 1,880 t of DecaBDE. In Nigeria, as for most developing countries, there is currently no adequate e-waste management, plastic separation or destruction capacity. The data highlight the urgent need to develop environmentally sound management for this large material flow.

Modeling metal stocks and flows: a review of dynamic material flow analysis methods.

Dynamic material flow analysis (MFA) is a frequently used method to assess past, present, and future stocks and flows of metals in the anthroposphere. Over the past fifteen years, dynamic MFA has contributed to increased knowledge about the quantities, qualities, and locations of metal-containing goods. This article presents a literature review of the methodologies applied in 60 dynamic MFAs of metals. The review is based on a standardized model description format, the ODD (overview, design concepts, details) protocol. We focus on giving a comprehensive overview of modeling approaches and structure them according to essential aspects, such as their treatment of material dissipation, spatial dimension of flows, or data uncertainty. The reviewed literature features similar basic modeling principles but very diverse extrapolation methods. Basic principles include the calculation of outflows of the in-use stock based on inflow or stock data and a lifetime distribution function. For extrapolating stocks and flows, authors apply constant, linear, exponential, and logistic models or approaches based on socioeconomic variables, such as regression models or the intensity-of-use hypothesis. The consideration and treatment of further aspects, such as dissipation, spatial distribution, and data uncertainty, vary significantly and highly depends on the objectives of each study.

Formation of PBDD/F from PBDE in electronic waste in recycling processes and under simulated extruding conditions.

The increasing volumes of waste electrical and electronic equipment (WEEE) in Europe and developing economies demand for efficient disposal solutions. However, WEEE also contains toxic compounds and, therefore, there is a need for recycling technologies for WEEE that creates revenue without causing environmental harm. Among other fast developing economies, South Africa is tempting to make use of recycled plastic. Brominated flame retardants (BFRs) are additives used to protect plastic materials in electrical and electronic equipment (EEE) against ignition. Some BFRs are known persistent organic pollutants (POPs) and some BFRs can be transformed into highly toxic compounds such as polybrominated dibenzofurans and dioxins (PBDD/Fs). In this study, the contents of critical BFRs, i.e. polybrominated diphenyl ethers, and highly toxic PBDD/Fs were measured in WEEE material from Switzerland and South Africa. The formation of PBDD/Fs has been observed in two South African recycling processes and under controlled laboratory conditions. Total PBDE-contents in the South African and Swiss plastic waste varied between 1×10(3) and 7×10(6) µg kg(-1). A few WEEE plastic fractions exceeded the RoHS limit of 1×10(6) µg kg(-1) for PBDEs and thus they could not be used for recycling products without special treatment. The total content of ∑PBDFs was around 1×10(3) µg kg(-1). Such contents in materials do not pose a risk for consumer under normal conditions. Workers at recycling plants might be at risk. The measured formation rates of PBDFs were between 2×10(-5) and 2×10(-4)∑PBDE(-1) min(-1).

The Best-of-2-Worlds philosophy: developing local dismantling and global infrastructure network for sustainable e-waste treatment in emerging economies.

E-waste is a complex waste category containing both hazardous and valuable substances. It demands for a cost-efficient treatment system which simultaneously liberates and refines target fractions in an environmentally sound way. In most developing countries there is a lack of systems covering all steps from disposal until final processing due to limited infrastructure and access to technologies and investment. This paper introduces the 'Best-of-2-Worlds' philosophy (Bo2W), which provides a network and pragmatic solution for e-waste treatment in emerging economies. It seeks technical and logistic integration of 'best' pre-processing in developing countries to manually dismantle e-waste and 'best' end-processing to treat hazardous and complex fractions in international state-of-the-art end-processing facilities. A series of dismantling trials was conducted on waste desktop computers, IT equipment, large and small household appliances, in order to compare the environmental and economic performances of the Bo2W philosophy with other conventional recycling scenarios. The assessment showed that the performance of the Bo2W scenario is more eco-efficient than mechanical separation scenarios and other local treatment solutions. For equipment containing substantial hazardous substances, it demands the assistance from domestic legislation for mandatory removal and safe handling of such fractions together with proper financing to cover the costs. Experience from Bo2W pilot projects in China and India highlighted key societal factors influencing successful implementation. These include market size, informal competitors, availability of national e-waste legislation, formal take-back systems, financing and trust between industrial players. The Bo2W philosophy can serve as a pragmatic and environmentally responsible transition before establishment of end-processing facilities in developing countries is made feasible. The executive models of Bo2W should be flexibly differentiated for various countries by adjusting to local conditions related to operational scale, level of centralized operations, dismantling depth, combination with mechanical processing and optimized logistics to international end-processors.

RoHS regulated substances in mixed plastics from waste electrical and electronic equipment.

The disposal and recovery of plastics from waste electrical and electronic equipment (WEEE) are of considerable importance, both from an environmental and an economic perspective. This paper presents the results of a study investigating current concentrations of hazardous substances in mixed plastics from WEEE and their implications for an environmentally sound recovery. The study included 53 sampling campaigns for mixed plastics from WEEE. The samples were analyzed with regard to heavy metals (cadmium, chromium, mercury, and lead) and flame retardants (PentaBDE, OctaBDE, DecaBDE, DecaBB) regulated in the RoHS Directive. Besides these substances, other brominated flame retardants known to occur in electronics (HBCD, TBBPA) as well as the total bromine and phosphorus contents were considered. Results show that no mixed plastics fraction from WEEE is completely free from substances regulated in the RoHS Directive. The lowest number and average concentrations were found in flat screen monitors. The highest concentrations were found in mixed plastics from CRT monitors and TVs. Mixed plastics fractions with high average concentrations of heavy metals originate from the treatment of small household appliances (cadmium), ICT equipment (lead), and consumer equipment (lead). Mixed plastics fractions with high average concentrations of brominated flame retardants mainly originate from the treatment of small household appliances for high temperature applications (DecaBDE), CRT monitors (OctaBDE and DecaBDE) and consumer equipment (DecaBDE), in particular CRT TVs (DecaBDE). To avoid a dissipation of hazardous substances into plastics and the environment, it is recommended that mixed plastics from WEEE are subject to a strict quality management.

Assessing computer waste generation in Chile using material flow analysis.

The quantities of e-waste are expected to increase sharply in Chile. The purpose of this paper is to provide a quantitative data basis on generated e-waste quantities. A material flow analysis was carried out assessing the generation of e-waste from computer equipment (desktop and laptop PCs as well as CRT and LCD-monitors). Import and sales data were collected from the Chilean Customs database as well as from publications by the International Data Corporation. A survey was conducted to determine consumers' choices with respect to storage, re-use and disposal of computer equipment. The generation of e-waste was assessed in a baseline as well as upper and lower scenarios until 2020. The results for the baseline scenario show that about 10,000 and 20,000 tons of computer waste may be generated in the years 2010 and 2020, respectively. The cumulative e-waste generation will be four to five times higher in the upcoming decade (2010-2019) than during the current decade (2000-2009). By 2020, the shares of LCD-monitors and laptops will increase more rapidly replacing other e-waste including the CRT-monitors. The model also shows the principal flows of computer equipment from production and sale to recycling and disposal. The re-use of computer equipment plays an important role in Chile. An appropriate recycling scheme will have to be introduced to provide adequate solutions for the growing rate of e-waste generation.

One laptop per child, local refurbishment or overseas donations? Sustainability assessment of computer supply scenarios for schools in Colombia.

With the intention of bridging the 'digital divide' many programmes have been launched to provide computers for educational institutions, ranging from refurbishing second hand computers to delivering low cost new computers. The fast and economical provision of large quantities of equipment is one of the many challenges faced by such programmes. If an increase is to be achieved in the sustainability of computer supplies for schools, not only must equipment be provided, but also suitable training and maintenance delivered. Furthermore, appropriate recycling has to be ensured, so that end-of-life equipment can be dealt with properly. This study has evaluated the suitability of three computer supply scenarios to schools in Colombia: (i) 'Colombian refurbishment', -refurbishment of computers donated in Colombia, (ii) 'Overseas refurbishment', -import of computers which were donated and refurbished abroad, and (iii) 'XO Laptop', -purchase of low cost computers manufactured in Korea. The methods applied were: Material Flow Assessment, -to assess the quantities-, Life Cycle Assessment, -to assess the environmental impacts, and the application of the Multiple Attribute Utility Theory, -to analyse, evaluate and compare different scenarios. The most sustainable solution proved to be the local refurbishment of second hand computers of Colombian origin to an appropriate technical standard. The environmental impacts of such practices need to be evaluated carefully, as second hand appliances have to be maintained, require spare parts and sometimes use more energy than newer equipment. Providing schools with second hand computers from overseas and through programmes such as 'One Laptop Per Child' has the disadvantage that the potential for social improvements - such as creation of jobs and local industry involvement - is very low.

Dynamic equilibrium dissolution of complex nonaqueous phase liquid mixtures into the aqueous phase.

Human health risks posed by hazardous substances seeping from a pool of nonaqueous phase liquids (NAPLs) into groundwater change over time because the more soluble compounds such as benzene, toluene, ethylbenzene, and xylene (BTEX) dissolve faster into the aqueous phase than less soluble compounds such as polycyclic aromatic hydrocarbons (PAH). Long-term dissolution from diesel fuel into the aqueous phase was determined experimentally in a continuous flow-through system using the slow-stirring method. The data obtained are interpreted using a dynamic equilibrium dissolution model based on Raoult's law. The predicted temporal development of aqueous concentrations are in good agreement with the experimental results. When a compound in the NAPL approaches complete depletion, a tailing behavior is observed, which is assigned to nonequilibrium effects, such as mass transfer limitations in the NAPL phase. The model predicted an increase of the mean molar mass of the diesel fuel of 1.5% over the entire experimental period. It should be noted that, if the dissolution process were to proceed further, the change in the mean molar mass could become significant and render the simple model inaccurate. Yet the simple model supports the assessment of initial action after a contamination event as well as the planning of long-term remedial strategies.

Movement and fate of residual mineral oil contaminants in bioremediated soil.

After the bioremediation of soils contaminated with mineral oil products, residual contaminants (designated as total solvent extractable material [TSEM]) remain therein. Since limited information is available about the movement and fate of these residual contaminants in the environment, the potential environmental hazards are difficult to assess. The aim of this study was to identify and quantify the relevant transport and transformation processes of the residual contaminants in bioremediated soil such as volatilization, leaching, and further biodegradation and to conduct a mass flow analysis for the TSEM in bioremediated soil for the first year after application as top soil. The results indicate that after 1 year, the major portion (93%) of the TSEM can be recovered in the top soil and 7% of the TSEM was lost. The majority of the total losses (>98%) was due to transformation processes (biodegradation and aging effects), while small amounts escaped into the atmosphere (0.08%), plant uptake was negligible, (<0.001%) and leaching, identified as the major transport process, accounted for only small effects (1.7%).